Type 2 to Type 1 Charging Cable
A one-piece AC charging cable with a Type 2 plug for the charger and a Type 1 (J1772) plug for the car, used by Japanese-import EVs and plug-in hybrids in New Zealand
Type 2 to Type 1 Charging Cable Overview
Key Specifications
- Connectors: Type 2 (IEC 62196-2) plug for the charger; Type 1 (SAE J1772) plug for the car
- Rating: 32A single phase, quoted by NZ retailers as up to 7kW to 7.4kW
- Charging Type: AC only; does not enable DC fast charging
- Lengths Sold in NZ: 5m, 8m, 10m and 15m
- Weather Rating: IP54 (Smart EV Chargers and EV Power cables)
- Warranty: 1 year (Hikotron) to 2 years (EV Power)
- NZ Price: $169 (Smart EV Chargers 5m) to $355 (Smart EV Chargers 15m) inc GST
Choosing a Cable
- • Check your car first: a 5-pin round AC inlet is Type 1, a 7-pin oval inlet is Type 2
- • Many Japanese-import Nissan Leafs and older Mitsubishi Outlander PHEVs have a Type 1 inlet
- • Pick a 32A cable; Drive EV notes some cables are rated only 16A, which can limit charging to around 3.6kW
- • Choose a length: 5m suits most uses, with 8m, 10m and 15m versions also sold in NZ
- • Ask the supplier for an SDoC; EV Power says one is available on request for its lead
Benefits
- • Lets a Type 1 car charge at Type 2 socketed public AC chargers at malls, supermarkets, motels and workplaces
- • Works with socketed Type 2 wall chargers at home
- • A 32A single-phase rating supports up to about 7kW where the charger and car allow it
- • One cable with the right plug at each end, so no separate adapter is needed
- • Portable enough to keep in the boot for charging away from home
Considerations
- • Only works with chargers that have a Type 2 socket, not tethered chargers with a fixed cable
- • Cannot be used as an extension on the end of another Type 2 cable
- • AC charging only; DC fast charging on a Japanese-import Leaf uses the CHAdeMO cable at the charger
- • Cars with a Type 2 inlet need a Type 2 to Type 2 cable instead
- • WorkSafe advises never to use modified charging equipment, such as overseas equipment fitted with a New Zealand plug
About Type 2 to Type 1 Charging Cables
A Type 2 to Type 1 charging cable has a Type 2 (IEC 62196-2) plug at one end, which goes into the charger, and a Type 1 (SAE J1772) plug at the other, which goes into the car. Type 2 sockets are the New Zealand standard, but many cars imported from Japan, such as the Nissan Leaf, Mitsubishi Outlander PHEV, Mitsubishi i-MiEV, Toyota Prius Plug-in and Nissan e-NV200, have a Type 1 AC inlet. A Type 1 inlet is a 5-pin round socket, while a Type 2 inlet is a 7-pin oval socket.
New Zealand retailers sell these cables so Type 1 cars can charge at Type 2 socketed AC chargers, where you bring your own cable, such as those at malls, supermarkets, motels and workplaces, and from socketed Type 2 wall chargers at home. The cables sold by Smart EV Chargers, Drive EV, EV Power and Hikotron are rated at 32A single phase, which retailers quote as up to about 7kW. The actual charging speed also depends on the charger, the car's onboard charger and the installation.
The cable is for AC charging only and does not enable DC fast charging. It only works with chargers that have a Type 2 socket, not tethered chargers with a fixed cable, and it can't be plugged into the end of another Type 2 cable as an extension. WorkSafe advises never to use modified charging equipment, such as overseas equipment fitted with a New Zealand plug, and suggests asking for the supplier declaration of conformity (SDoC) before buying charging equipment. EV Power says an SDoC for its lead is available on request.
More Information
Type 1 cable guidance, safety advice and New Zealand listings:
Type 1 Cable Advice
Check that your car has a 5-pin round Type 1 inlet and that the charger has a Type 2 socket (not a fixed cable) before you buy. Browse other EV parts or find an EV service centre near you.

